28
connecting to a wired network
to connect to a wired network:
1. Ensure you have:
• An Ethernet cable long enough to reach your TV
• A router or modem with an available Ethernet port
• A high-speed internet connection
2. Connect your Ethernet cable to the router and to the LAN port on the left of the TV.
3. Usage of DHCP is recommended to configure the TV.
connecting to a wireless network
to connect to a wireless network:
1. Ensure you have:
• A router broadcasting a high-speed wireless signal (54mbps recommended or higher)
• A high-speed internet connection
2. Usage of DHCP is recommended to configure the TV.
description oF operation
The first time you turn on the TV, the Setup App will guide you through each of the steps necessary to get your TV ready for use.
Before you begin the first-time setup:
• Your TV should be installed and the power cord should be connected to an electrical outlet.
• Your devices should be connected.
• If you have a wireless network, have the network key ready.
• If you are connecting to your network with an ethernet cable, connect it to the LAN port on the TV.
operation Menu
This TV set allows you to adjust any settings by selecting from the menu screens.
1. Press the Power/Standby button on the remote. The TV powers on.
2. Select input source:
• Press SOURCE button to display the input source list;
• Press / or “SOURCE” button to select the input source you want;
• Press OK button to enter the input source;
• Press EXIT button to quit.
dtv channel Menu
Press MENU button to display the main menu.
Press / button to select CHANNEL in the main menu, it will highlight the first option.
1. Press / button to select the option that you want to adjust in the CHANNEL menu.
2. Press OK button to adjust.
3. After finishing your adjustment, Press MENU button to save and return back to the previous menu.
auto tuning
• Press / button to select Auto Tuning, then press OK button to start auto search.
dtv Manual tuning
• Press / button to select DTV Manual Tuning, then press OK button to input password to enter sub-menu. (Default password is '0000')
• Press / button to select channel, then press OK button to search program.
atv Manual tuning
• Press / button to select ATV Manual Tuning, then press OK button to input password to enter sub-menu. (Default password is '0000')
• Press / button to select channel number you want to store.
• Press / button to select the second option. Press / button to select audio system.
• Press / button to select search, then press OK button to start tuning. Press red button on your remote control to save the settings and
menu button to go back to the previous menu.
Instruction Manual
