MSM MTU AIS-C, Руководство пользователя

Страница: 18 / 46

USER MANUAL MTU AIS-C Page 15
R
v0
1
4.3. SENSOR INTERFACE CONNECTOR. "Y TYPE"
This connector includes external sensor connections in the same connector, called a "Y"
connector.
The connector is of the Soriau brand with reference UTS6JC14E19SY. The pins included in the Y
connector are listed below:
PIN
ID Signal Name msg6 Description
A S_RS232_TX2 Puerto 2 Tx Sensor interface
B
S_RS232_RX2 Puerto 2 Rx Sensor interface
C S_DIG_IO_4 Digital IO 4 not isolated
D EXT_ WAKEUP External Wake Up
E SDI_DATA BUS SDI Data signal-
F I BIT-2 Digital input 3 isolated (+)
G ISO_DI_3- Racon alarm NC Digital input 3 isolated (-)
H I BIT-3 Digital input 4 isolated (+)
J ISO_DI_4- free Digital input 4 isolated (-)
K I BIT-4 Digital input 5 isolated (+)
L ISO_DI_5- free Digital input 5 isolated (-)
M I ANALOG 1 Analog input 1 isolated (+)
N ISO_AN_1- 0-36V Analog input 1 isolated (-)
P I ANALOG 2 Analog input 2 isolated (+)
R ISO_AN_2- 0-36V Analog input 2 isolated (-)
S AN_2+ Analog input 2 non-isolated (positive)
T AN_2- Analog input 2 non-isolated (negative)
U AN_3+ Analog input 3 non-isolated (positive)
V AN_3- Analog input 3 non-isolated (negative)
* Only available when the configuration includes a sensor interface, otherwise these pins do not
connect
** Use only at your provider's instructions.