MS-9185 Server Board
2-4
Socket 1207 CPU & Cooler Installation
1.
Locate the first CPU socket. (The CPU
has a plastic cap on it to protect the
contact from damage. Before install-
ing the CPU, always cover it to pro-
tect the socket pins.)
3.
Raise the load lever up to its full extent.
4.
Open the load plate.
2.
Remove the plastic cap from the load
plate. The pins of the socket reveal.
5.
After confirming the CPU direction (indicated below with red circles) for correct
mating, put down the CPU in the socket housing frame. Be sure to grasp on the
edge of the CPU base. Note that the alignment keys are matched.
6.
Visually inspect if the CPU is seated well into the socket. If not, take out the CPU
with pure vertical motion and reinstall.
Yellow Triangle
Alignment Key
Содержание K9SD Master
Страница 1: ...i K9SD Master MS 9185 V1 X Server Board G52 S9185X1...
Страница 5: ...v WEEE Waste Electrical and Electronic Equipment Statement...
Страница 6: ...vi...
Страница 7: ...vii...
