manualshive.com logo in svg

MSI Baby AT SI19, Руководство пользователя, Страница: 9 / 104

Поделиться
Скачать
MSI Baby AT SI19 Скачать руководство пользователя страница 9

CHAPTER 2

HARDWARE INSTALLATION

1-1

Chapter 1

INTRODUCTION

The Baby AT SI19 mainboard is a high-performance personal computer
mainboard.  This mainboard supports Intel

® 

Pentium

® 

processor/Pentium

®

processor with MMX

TM 

technology, Cyrix

® 

6x86/6x86L/6x86MX, and AMD

®

K5/K6 processors.   The mainboard also supports three 32-bit PCI (Periph-
eral Component Interconnect) Local Bus standard slots.

The mainboard uses the highly integrated SiS

® 

5591 chipset to support the

AGP/PCI/ISA and Green standards, and to provide the Host/AGP bridge.
The SiS

® 

5591 chipset integrates all system control functions such as ACPI

(Advanced Configuration and Power Interface).  The ACPI provides more
Energy Saving Features for the OSPM(OS Direct Power Management)
function. The SiS

® 

5595 chipset also improves the IDE transfer rate by

supporting Ultra DMA/33 IDE that transfer data at the rate of 33MB/s.  In
addition to this, it also offers hardware monitor function as an optional
function.

Содержание Baby AT SI19









































































































Отзывы:

Нет отзывов