manualshive.com logo in svg

MSI Baby AT SI19, Руководство пользователя, Страница: 78 / 104

Поделиться
Скачать
MSI Baby AT SI19 Скачать руководство пользователя страница 78

CHAPTER 3

CHAPTER 3

CHAPTER 3

CHAPTER 3

CHAPTER 3

AWARD

AWARD

AWARD

AWARD

AWARD

®

 BIOS SETUP

 BIOS SETUP

 BIOS SETUP

 BIOS SETUP

 BIOS SETUP

3-33

Onboard Parallel Mode

Select an operating mode for the onboard parallel (printer) port as

Normal EPP (Extended Parallel Port) ECP (Extended Capabilities Port) CEP+EPP
PC AT parallel port Bidirectional port Fast, buffered port Fast, buffered,
bidirectional port.

Select Normal unless you are certain your hardware and software

both support EPP or ECP mode.  The settings are SPP, ECP/EPP, ECP, or EPP/
SPP.

USB Controller

This items allows you to determine, whether to enable the

USB(Universal Serial Bus) function or not.  The settings are Enabled or
Disabled.

USB Keyboard Support

This items allows you to use USB Keyboard without installing any

driver on some OS.  If you want to use this function, you must enable USB
Controller function.  The settings are Enabled or Disabled.

KB Power ON Password

To use this function, you need a keyboard which support this

power on functions.  During Enter, if you push the ENTER key , the system
will change from ON to OFF, and OFF to ON.  During Disabled, this function
will not work.

Содержание Baby AT SI19









































































































Отзывы:

Нет отзывов