manualshive.com logo in svg

MSI Baby AT SI19, Руководство пользователя, Страница: 87 / 104

Поделиться
Скачать
MSI Baby AT SI19 Скачать руководство пользователя страница 87

CHAPTER 4

CHAPTER 4

CHAPTER 4

CHAPTER 4

CHAPTER 4

AMI

AMI

AMI

AMI

AMI

®

 BIOS USER’S GUIDE

 BIOS USER’S GUIDE

 BIOS USER’S GUIDE

 BIOS USER’S GUIDE

 BIOS USER’S GUIDE

4-7

Floppy Drive Swap

Set this option to Enabled to specify that floppy drives A: and B:

are swapped.  The setting are Enabled and Disabled.  The Optimal and Fail-
Safe default settings are Disabled.

PS/2

®

 Mouse Support

When this option is set to Enabled, AMI® BIOS supports a PS/2®-

type mouse.  The settings are Enabled and Disabled.  The Optimal and Fail-
Safe default settings are Enabled.

Primary Display

This option configures the primary display subsytem in the

computer.  The settings are Mono(monochrome), 40CGA, 80CGA or VGA/
EGA.  The optimal and Fail-Safe default settings are VGA/EGA.

Password Check

This option specifies the type of AMI® BIOS password protection

that is implemented.  The Optimal and Fail-Safe default settings are Setup.

Boot to OS/2

®

, DRAM 64MB or Above

Set this option to Enabled to permit the BIOS to run properly, if

OS/2

®

 is to be used with > 64MB of DRAM.  The settings are Enabled or

Disabled.  The Optimal and Fail-safe default settings are Disabled.

Internal Cache/External Cache

This option selects the type of caching algorithm used by AMI®

BIOS and the CPU for L1 cache memory(internal/external to the CPU).  The
settings are Writeback - a writeback algorithm is used, Write-through - a
write-through algorithm is used or Disabled - AMI® BIOS does not specify
the type of caching algorithm.  The algorithm is set by the CPU.  The Optimal
and Fail-Safe default settings are Writeback.

Содержание Baby AT SI19









































































































Отзывы:

Нет отзывов