Failure to follow this warning can result in serious personal injury or death.
(1)
Turn the head harness over the front of the facepiece so the
harness covers the lens of the facepiece.
This will open up the faceblank to make it easier to install the
spectacle kit.
(2)
Squeeze in on the wire frame of the spectacle kit at the large
bends about 2 in. (5 cm) from the ends.
(3)
Push the top part of the wire frame into the lens of the
facepiece.
The faceblank has three rubber tabs made to grab the wire
frame.
(4)
Push one end of the wire frame up into the facepiece so the
frame is in position along the edge where the lens and
faceblank meet.
28
OptimAir® MM PAPR
8 Accessories
US
