manualshive.com logo in svg

MSA GASGARD 8, Инструкция по эксплуатации

Поделиться
Скачать
MSA GASGARD 8 Скачать руководство пользователя страница 25

•

The choice is confirmed by pressing the <ACK/VALID>
button or rejected by pressing the <ESC/TEST> button.

To Access the Date <dAtE> Mode:

1.

Select <dAtE> and press the <ACK/VALID> button.

2.

Use the <SCROLL UP> and <SCROLL DOWN> buttons to
access the time, date, and year.

To Access the Time <tiME> Mode:

1.

Select <tiME> and press the <ACK/VALID> button.

2.

If the time listed is incorrect, press the <ACK/VALID> button
to correct. 

3.

Use the <SCROLL UP> and <SCROLL DOWN> buttons to
set the correct time.

NOTE: Enter the time in the military format and in the same

manner as the password.

•

The choice is confirmed by pressing the <ACK/VALID>
button or rejected by pressing the <ESC/TEST> button.

To Access the Day <dAy> Mode:

1.

Select <dAy> and press the <ACK/VALID> button.

2.

If the day listed is incorrect, press the <ACK/VALID> button
to correct. 

3.

Use the <SCROLL UP> and <SCROLL DOWN> buttons to
set the correct day.

NOTE: Enter the day as the day and month and in the same

manner as the password.

•

The choice is confirmed by pressing the <ACK/VALID>
button or rejected by pressing the <ESC/TEST> button.

To Access the Year <yEAr> Mode:

1.

Select <yEAr> and press the <ACK/VALID> button.

2.

If the year listed is incorrect, press the <ACK/VALID> button
to correct. 

3.

Use the <SCROLL UP> and <SCROLL DOWN> buttons to
set the correct four-digit year.

Chapter 3, Start-up and Operation

3-8

Содержание GASGARD 8



































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды