MSA ALTAIR 4XR, Руководство по эксплуатации

Страница: 31 / 63

ALTAIR
®
4XR
31
Operation
US
(3) Set alarms on or off by pressing the  or  button.
(4) Press the
q
button to confirm the selection.
LOW ALARM settings for the first sensor display.
(5) Press the

or

button to change the value.
(6) Press the
q
button to store the value.
HIGH ALARM settings for the first sensor display.
(7) Press the

or

button to change the value.
(8) Press the
q
button to store the value.
STEL ALARM settings (for toxic sensors only) display.
(9) Press the  or  button to change the value.
(10) Press the
q
button to store the value.
TWA ALARM settings (for toxic sensor only) for display.
(11) Press the  or  button to change the value.
(12) Press the
q
button to store the value.
(13) Repeat the procedure for all other sensors.
(14) After setting the last sensor, continue to Time and Date setup.
60% LEL or 3.0% volume of methane is the maximum High Alarm set point that can be programmed.
The combustible alarm can be turned OFF by the user in the instrument setup. When the combustible
alarm is turned OFF, the only indicator to the user that the combustible alarm is turned OFF occurs
during power up of the instrument at which a startup screen will indicate that the combustible alarm is
turned OFF. When turned ON, the combustible high alarm is latching.
The combustible alarm can be silenced momentarily by pressing the  button. However, if the gas
concentration causing the alarm is still present, the device will go back into alarm.
Setup Time and Date
This submenu is for setting date and time.
For more information, see the flow charts in chapter 7.9 "Time and Date Setup".
Fig. 7 Date and Time Setup
(1) To bypass this setup, press the

or

button; otherwise, continue as follows.
(2) Press the
q
button to enter the submenu.
(3) Set month by pressing the

or

button.
(4) Press the
q
button to confirm month.
(5) Repeat this procedure for day, year, hours and minutes.
By default, time is displayed in 12 hour format.
The
BT SETUP
screen will be displayed next.