MS ENERGY NEUTRON n1, Инструкция по эксплуатации

Страница: 182 / 204

ENG
17
 Do not leave your electric scooter with a significantly discharged battery for a few
hours. Charge it promptly.

When storing the electric scooter for a long period, make sure the battery is at
least 40‐50 % charged. It is advisable to charge your scooter minimum once per 30
days.

Always use only the original charger that corresponds to the model of the scooter.
 Do not leave your electric scooter in the cold temperature below 0 or under the
direct sun. Keep the battery dry. Negative environmental conditions can damage
the battery capacity.
 Polymer lithium batteries have to be treated with extreme caution.
Unappropriated charging, damage or overheating can result in a fire. Do not leave
your electric scooter to charge without supervision. Do not leave the electric
scooter to charge overnight. Always supervise the electric scooter while it is
charging and avoid battery over‐charge. Do not use, charge or leave a damaged
battery unattended and follow the disposal protocols immediately.
Charger
The dedicated charger provided by Factory has a charging protection timing function.
Charging instructions

Open the charging port cover on the electric scooter and insert the charger output
connector into the charging port.
 Insert the charger input power plug into the power socket (AC110V‐220V)

Charger light is red to indicate that charging is in progress; when the charger light
turns green, it indicates that the battery is fully charged.
 When charging the battery, place it in a dry, ventilated environment.

After charging, be sure to return the protective rubber cover on the scooter!
Entry of dust, water or other foreign objects into the slot can damage the
scooter!
9 TROUBLESHOOTING
If your E‐Scooter does not operate as usual or appears to be faulty please read carefully
this section. Many operational issues can be resolved by users.
This simple procedure helps in restoring stable conditions for electric circuits.
Please contact Manufacturer Customer Care if the problem is unresolved or you have
other concerns.
SYMPTOMS POSSIBLE SOLUTIONS
Failed speed change
or too low maximum
velocity

Low battery voltage
 Bad governorhandle

Bad controller

Chargethe battery fully
 Replace the governor
handle, controller