MS ENERGY NEUTRON n1, Инструкция по эксплуатации

Страница: 178 / 204

ENG
13
Indicator Area
Total mileage ODO, single mileage TRIP, real‐time voltage V, operating current A,
running time TIME, error code E
The Buttons

Long press the
ON/OFF
button to Turn On the display
o
Short press the
ON/OFF
to switch between ODO, TRIP, V, A, E, TM in
the multi‐indicator
 Long press the
ON/OFF
to turn off the display
 Long press the
M
and
ON/OFF
at the same time to enter into the
Parameter
settings mode
.
o
Short press the
ON/OFF
button to switch between parameters.
o
Short press
M
to change the settings.
o
Long press the
M
and
ON/OFF
at the same time to save and exit

Long press
M
to turn on the lights
Description
1. Voltage status level
：
POWER
Note : The battery status display may change while driving, depending of themotor
load. The correct battery level is indicated when the scooter is in stationary condition.
2. Multi‐function display area
Total mileage ODO, single mileage TRIP, real‐time voltage V, operating current
A, running time TIME, fault code E
3. Fault status display area E
When the symbol is flashing, Short press
ON / OFF
button to adjust the display interface to the E interface, the
corresponding number of the interface on behalf of the corresponding fault
content, the specific status is as follows:
ERRO 1: Motor malfunction
ERRO 2: Display fault
ERRO 3: Controller failure
ERRO 4: Power brake
ERRO 5: Under voltage protection
ERRO 6: Communication failure, the instrument can not receive the output of the
controller
ERRO 7: Communication failure, the controller can not receive the output of the
instrument