MRV Communications MRW55, Руководство пользователя

Страница: 208 / 244

Command Line Interface
7-82
7
wpa-mode
This command specifies whether Wi-Fi Protected Access (WPA) is to use 802.1x
dynamic keys or a pre-shared key.
Syntax
wpa-mode < dynamic | pre-shared-key >
• dynamic - WPA with 802.1x dynamic keys.
• pre-shared-key - WPA with a pre-shared key.
Default Setting
dynamic
Command Mode
Interface Configuration (Wireless)
Command Usage
• When the WPA mode is set to “dynamic,” clients are authenticated using
802.1x via a RADIUS server. Each client has to be WPA-enabled or support
802.1x client software. A RADIUS server must also be configured and be
available in the wired network.
• In the dynamic mode, keys are generated for each wireless client
associating with the access point. These keys are regenerated periodically,
and also each time the wireless client is re-authenticated.
• When the WPA mode is set to “pre-shared-key,” the key must first be
generated and distributed to all wireless clients before they can successfully
associate with the access point.
Example
Related Commands
wpa-clients (7-81)
wpa-preshared-key (7-82)
wpa-preshared-key
This command defines a Wi-Fi Protected Access (WPA) preshared-key.
Syntax
wpa-preshared-key < type> < value>
• type - Input format. (Options: ASCII, HEX)
• value - The key string. For ASCII input, use 5/13 alphanumeric characters
for 64/128 bit strings. For HEX input, use 10/26 hexadecimal digits for 64/
128 bit strings.
AP(if-wireless g)#wpa-mode pre-shared-key
AP(if-wireless g)#