MRV Communications MRW55, Руководство пользователя

Страница: 146 / 244

Command Line Interface
7-20
7
System Clock Commands
These commands are used to configure SNTP and system clock settings on the
wireless bridge.
sntp-server ip
This command sets the IP address of the servers to which SNTP time requests are
issued. Use the this command with no arguments to clear all time servers from the
current list.
Syntax
sntp-server ip < 1 | 2 > < ip>
• 1 - First time server.
• 2 - Second time server.
• ip - IP address of an time server (NTP or SNTP).
Default Setting
137.92.140.80
192.43.244.18
Command Mode
Global Configuration
Command Usage
When SNTP client mode is enabled using the sntp-server enable command,
the sntp-server ip command specifies the time servers from which the
wireless bridge polls for time updates. The wireless bridge will poll the time
servers in the order specified until a response is received.
Example
Related Commands
sntp-server enable (7-21)
show sntp (7-23)
Command Function Mode Page
sntp-server ip Specifies one or more time servers GC 7-20
sntp-server enable Accepts time from the specified time servers GC 7-21
sntp-server date-time Manually sets the system date and time GC 7-21
sntp-server
daylight-saving
Sets the start and end dates for daylight savings time GC 7-22
sntp-server timezone Sets the time zone for the wireless bridge’s internal clock GC 7-22
show sntp Shows current SNTP configuration settings Exec 7-23
MRW55#(config)#sntp-server ip 10.1.0.19
MRW55##