MRV Communications MRW55, Руководство пользователя

Страница: 150 / 244

Command Line Interface
7-24
7
SNMP Commands
Controls access to this wireless bridge from management stations using the Simple
Network Management Protocol (SNMP), as well as the hosts that will receive trap
messages.
snmp-server community
This command defines the community access string for the Simple Network
Management Protocol. Use the
no form to remove the specified community string.
Syntax
snmp-server community string [ ro | rw ]
no snmp-server community string
• string - Community string that acts like a password and permits access to
the SNMP protocol. (Maximum length: 23 characters, case sensitive)
• ro - Specifies read-only access. Authorized management stations are only
able to retrieve MIB objects.
• rw - Specifies read/write access. Authorized management stations are able
to both retrieve and modify MIB objects.
Default Setting
• public - Read-only access. Authorized management stations are only able
to retrieve MIB objects.
• private - Read/write access. Authorized management stations are able to
both retrieve and modify MIB objects.
Command Mode
Global Configuration
Command Usage
If you enter a community string without the ro or rw option, the default is read
only.
Example
Command Function Mode Page
snmp-server community Sets up the community access string to permit access to
SNMP commands
GC 7-24
snmp-server contact Sets the system contact string GC 7-25
snmp-server enable
server
Enables SNMP service and traps GC 7-25
snmp-server host Specifies the recipient of an SNMP notification operation GC 7-26
snmp-server location Sets the system location string GC 7-27
show snmp Displays the status of SNMP communications Exec 7-27
MRW55#(config)#snmp-server community alpha rw
MRW55#(config)#