MRMC Bolt X, Быстрый старт

Страница: 32 / 68

Bolt X Quick Start Guide
28
After switching on YRC1000, on the pendant, in the Job menu, make sure
no error message is displayed at the bottom of the screen. (Function
buttons should be blank.)
Switching Bolt X to Manual Mode
You can run the Bolt X in manual mode without using Flair.
1. Ensure that YRC1000 is powered up and booted.
2. Switch the key on the pendant to ‘Teach’ position.
3. If the E-stop cable as well as the rest of the system are still
connected, switch the key on the safety PLC to horizontal position
to bypass Flair (red LED will come on).
4. Alternatively, if the safety PLC is not available, you can use Bypass
Estop box [20529] and connect it directly to the umbilical.
Blank Function buttons
Job menu