MRF 13216, Руководство оператора

Страница: 14 / 32

14
9. Check to be sure the loader attaching plate pins or wedges (C)
extended into the holes in the bottom of the attachment mounting
frame. If not, move the loader attaching plate levers to the unlocked
(up) position and repeat installation.
10. Connect the attachment hydraulic hoses to the loader’s front auxilia-
ry couplers (D).
a. Install the male couplers into the female couplers and pull or push
the sleeves (E) to be sure they are locked into place.
b. Rotate the coupler sleeves as shown so the ball (F) is outside the
groove (G) to prevent the coupler disconnecting (Some sleeves
may not have this locking mechanism).
Removing the Attachment
1. Follow the instructions in the loader operator’s manual to remove the
attachment and exit the operator station safely.
2. Fully lower the loader lift arms and the attachment to level ground.
3. Follow instructions in the loader operator’s manual to relieve hy-
draulic pressure in the front auxiliary hydraulic coupler lines.
4. Stop the loader engine.
Installing and Removing