Installation and User Instructions for S813 Readers
1
Mount the Backplate
2
Reader Links
The following links are provided on the reader's PCB:
LK1
(Audio feedback) - Set to "0" for sound off. Set to "1" for sound on.
Lk2 (Test) - Ensure that this link has been removed.
The S813 is a
contactless smart-card reader, with LCD and
keypad, which uses
p
. The S813 is able to read
Philips MIFARE and Philips MIFARE DESfire
smart cards containing optional biometric data.
The reader can simultaneously support both card
formats.
The reader is automatically configured to accept
the first two card formats presented.
combined fingerprint and
20mA current loop seudo-
random communications
®
®
NOTE: Correct mounting of the unit is essential. Follow these guidelines carefully.
It is important to ensure that people present fingers at the same height, angle and orientation as
presented during fingerprint enrollment. Inconsistencies may cause difficulty in gaining access. For
best results:
·
Mount the unit flat against a wall.
·
The top of the reader must be at a height of 3'7" to 3'11" (1.1m to1.2m) from the floor.
·
Ensure that desks or other objects do not obstruct easy access to the reader.
Mounting the reader:
1) Detach the main body of the reader from the
backplate by releasing the two securing
screws along the bottom edge, swinging the
backplate upwards and easing it away from
the two top clips.
2) Feed the cable and terminal block through
the backplate, then screw the backplate to
the wall using the holes provided.
