background image

CONTENTS

Product Overview

Safety Precautions

Product Introduction

Product Use

Introduction and Use of Level Meter

Maintenance and Servicing

Common Problems

Packing List

1

3

4

9

13

17

19

20

3

2

Dear user of 

MRC

 Hello! Thank you for choosing 

MRC

 Self-pressurized Series for LN2 Storage and

 Supply (hereinafter referred to as “the Product”). Please read and follow the
 Instructions strictly and keep it properly, to better understand the Instructions, well use

!the Product and avoid personal injuries or property losses

The Product is a cryogenic vessel. User is recommended to assign specific person to master 
the Instructions and operate the Product as specified.
Organize safety education to relevant personnel regularly to avoid losses due to misoperation.
It is forbidden to overfill the Product. It should reach the lower edge of neck tube as the optimal 
injection volume.
The pipeline connecting the liquid nitrogen container to the outside must be firm to prevent the 
occurrence of liquid nitrogen leaking, dripping, splashing and other phenomena to ensure the 
safety of the operator.
After use of the Self-pressurized Series tank, the inlet valve must be closed. 
The bottom of the container is equipped with four high-strength casters, which is convenient for 
short-distance movement of the container. When moving, care should be taken, and it must not 
be pushed or moved violently to prevent collision. It is strictly forbidden to move on uneven 
ground.
Transfer the Product with care to avoid overflow and splashing.
It is forbidden to contain any other low-temperature or high-temperature medium other than liquid 
nitrogen; otherwise, quality warranty will expire!
Avoid skin exposure and take proper protection measures, such as low-temperature gloves and 
goggles, while handling the Product due to its ultralow temperature (-195.8

). Do not wear boots 

to avoid cold injury when liquid nitrogen drops in the boots.
Do not touch the container opening of liquid nitrogen due to low temperature.
It is forbidden to block the container opening that has liquid nitrogen; otherwise, pressurization 
and explosion may occur!

SAFETY PRECAUTIONS

WARNING

ATTENTION

Violation may lead to major casualties!

Actions or operations which 

must be prohibited 

Actions or operations which 

must be followed

Violation may lead to personal casualties, 

container damage and property loss!

Содержание YDZ-100K













Отзывы: