Your
IR-CAM-FEVER
comes with the following items:
•
USB-OTG cables
•
Quick Start Guide and Warranty
•
Single Board Android Computer
Read This First
•
The IR-CAM-FEVER device should be connected to the single board computer
(SBC) through the USB cable. The application that runs the IR-CAM-FEVER is
preinstalled on the SBC.
•
Connect the SBC to a monitor through the HDMI plug and a mouse to a USB plug
and run the IR-CAM-FEVER aplication.
•
Attach the IR-CAM-FEVER a tripod or any other fixed stationary point by a
¼ inch screw.
•
Attach the SBC to a fixed location.
