Terms and Conditions
Congratulations!
You are now the owner of a new
IR-CAM-FEVER
world class thermal imaging device which includes
hardware and software components (the “Product”).
PLEASE READ THIS DOCUMENT CAREFULLY;
1.
GENERAL.
This document represents our entire understanding with respect to its subject matter and
supersedes any previous communication or agreements that may exist. Modifications to this document will
be made only through a written amendment signed by both parties. This document will be governed by the
exclusive laws of the state of Israel, excluding rules as to choice and conflict of law. The courts of Israel will
have exclusive jurisdiction over all claims arising out of or relating
to this document, and you hereby consent and submit to such exclusive jurisdiction. It is agreed that the
United Nations Convention on Contracts for the International Sale of Goods will not apply. Judgments of
the foregoing courts will be enforceable in any country.
PRODUCT USAGE NOTICES
Attachment to your Mobile Device
To avoid damage to your Product and mobile device, attachment of the Product to your mobile device
should be done with care, securing the locking knob with your fingers only. Do not use any external tools
as too much pressure may mark or damage your mobile device.
Calibration
The Product makes use of specific calibration data, which was prepared for it in the factory. It is possible
that during prolonged field usage of the Product a deterioration of image will be noticed. In such case we
recommend that you send in the device, for re-calibration at the factory. Please contact our support team
for further instructions.
Accuracy
For most accurate temperature measurement results, we recommend that you wait 8-10 minutes after
you have started the Product before measuring a temperature.
