MRC IR-CAM-400, Руководство по эксплуатации

Страница: 53 / 87

45
Size (L×W×H) 200×117×127mm
8. Technical Support
For common problems arising during operation, please refer to the
following table. If the problem cannot be settled, please cut off the power
of the device and contact our technical department.
Failures Causes and Solutions
The infrared camera
can not start

The battery is uninstalled or improperly installed

Insert the battery; or re-install the battery.

The battery power runs out

Replace or charge the battery.

infrared camera auto- shutdown

restart in 5 seconds
The infrared camera
shuts down
automatically

The battery power runs out

Replace the battery.
Battery power runs
out fast

Ambient temperature is too low or too high.

The rechargeable battery is not fully charged

Recharge the rechargeable battery.

The life of battery is almost over, about 300
cycles of charge and discharge for the type of
battery

Replace rechargeable battery
No thermal image
displayed

Lens cap is not open

Open the lens cap.
Thermal image turns
black & white

Check if black and white color code is
selected

Reload default settings.