MRC IR-CAM-400, Руководство по эксплуатации

Страница: 23 / 87

15
5. Temperature distribution curve : Sample temperature distribution
curve of the measure line.
6. Point measure cursor : 10 measure points can be selected. Enter the
Main Menu
→
Measure
→
Spot to operate.
7. Symbol for 1-8X digital zoom: Display the multiple of digital zoom,
under the real-time measurement mode or the preview mode, click
the or key to change infrared images step-by-step in the
multiple of 0.1. long press key to close digital zoom function.
8. Point measure :
1, 2, 3 , 4, 5, 6, 7, 8,
9and 10indicates temperature value of point 1, 2, 3, 4, 5, 6, 7,
8 , 9 and 10 respectively.
9. Imaging mode : Infrared, visual, PIP, fusion, can be switched by
pressing the mode switch button.
10. Line measure : The temperature value in the crossing of measure line
and cursor line.
11. Area measure : Measure points within the area (maximum, minimum
or average temperature is optional)
12, 18. Lower or upper limit temperature : The lower and upper limit
temperature of the color code at the same time, change the lower and
upper limit temperature by manual, the screen will show “L&S” on the
top left corner, after changing the lower and upper limit temperature,
long press “ ”, enter “Image”
→
“L&S” then press “L&S” to exit this
mode.
13. Storage medium : IN indicates built-in FLASH, SD means SD card;
enter the Main menu
→
Setup
→
System Setup
→
Storage
Medium to adjust the storage medium.
14. USB symbol : USB0 means file transmission, USB1 means video
transmission; enter the Main menu
→
Setup
→
System Setup
→
USB to switch.
15. Color Code : 12 commonly used color code is available
16. Time Display : It displays the default date and time.
17. Battery condition : It indicates current battery power condition.
19. Temperature unit : There are three options:
、 、
K, enter the Main
Menu
→
Image
→
Analysis Setup
→
Temp unit to switch.
20. Emissivity : pre-set emissivity of infrared camera.