Indicator Light: red light indicates alarm is on; green light indicates the heating or cooling
function is on.
13
14
8. Control Panel
E : Press the button to confirm your current settings.
F : Press the button to start the instrument when it's in “Simple Operation” mode.
A
:
Press the button to enter the settings menu when in “Simple Operation” or
“Timing Program” modes.
B : Press the button to move the flashing cursor to the right when setting multiple
digits. When the cursor is at the right most digit, press the button to move it to the
first digit.
: Press the button to move the flashing cursor to the left when setting
multiple digits. When the cursor is at the first digit, pres the button to move it to the
last digit.
C : Press the button to move the cursor down. If the cursor is at the bottom line,
press the button to move it to the top.
D : Press the button to change the settings (for example, “YES/NO”, “ON/OFF”, or
number 0 to 9).
: Press the button to change the settings (for example, “YES/NO”, “ON/OFF”, or
number 0 to 9. Long press the button can change value continuously).
G : Press the button to stop the instrument when it's in “Simple Operation or Timing/
Program” mode.
9. Settings
Turn on the power switch at the right side of the instrument after the instrument is properly
placed. “Thanks for choosing
MRC LTD.
products” will be shown on
the display window.
The function selection menu will be displayed after 2 seconds.
Press “ ” button to choose the operation and press “ ” to confirm.
A. Simple Operation
Choose “Simple Operation” on the Main Menu and press the “ ” button to confirm.
The display window will then show the
Simple
Operation
Settings menu.
(
For models with illuminating function)
(for models with illuminance function)
Press “ ” button to choose the parameter that needs to be modified; press “ ” or
“ ” button to move the cursor to the digit that needs to be modified and press “ ”
or “ ” button to modified the current number; Press “ ” button when the cursor is at
back to main interface to return to the main interface. Press the “ ” button (wherever
the cursor is) to enter “Smple Operation” page.
Simple
Operation
Timing
/
Program
Main Set
Temp.
：
37.0
℃
Speed
：
100 rpm
Time
：
000:00:00
Main Interface
Temp.
：
37.0
℃
Speed
：
100 rpm
Time
：
000:00:00
Stop and Return
Temp.
：
37.0
℃
Speed
：
100 rpm
Light Strength
：
Time
：
000:00:00
Main Interface
1
Temp.
：
37.0
℃
Speed
：
100 rpm
Light Strength
：
Time
：
000:00:00
Stop and Return
1
...
