MRC FH-12-DB, Руководство пользователя

Страница: 15 / 29

14
Firstly, remove the 304 cross recessed pocket hexagon head combination screw with flat gasket and
spring gasket M4 * 12 with a flat-blade screwdriver, remove the outer row cover panel. Take the
anti-static curtain, hang the curtain on the keel (as is shown in Figure 12), the installation will be
completed outside the cover plate can be restored. After the installation is complete, restore the
outer row cover panel back to the original
（
7
）
Test after installation
After the installation, turn on the power to test whether the fan is running, LED lights are light, the
differential pressure gauge is beating, the socket has power, etc., if not please refer to 3.1 for
conduct troubleshooting. After the test is completed, install the rear panel, the upper rear cover
panel, installed in accordance with the demolition of the can be restored. The installation can be
restored in accordance with the opposite direction of disassembly.
（
8
）
Apply sealant
Places to apply sealant: 1, joint of the upper front cabinet and the side panel, 2, joint of the upper
front cabinet and the upper rear cabinet,3, joint of the upper rear cabinet and the rear cabinet, 4,
joint of the rear cabinet and the side panel, 5 joint of the side panel and the high-efficiency cabinet,6
gap in the front panel of the rear cabinet. Requirements: Sealant should be applied evenly, without
omission.