MPOWERD Luci Beam, Инструкция по эксплуатации

Страница: 3 / 5

Charging
Power buttons
• With the 2 built-in batteries in the
headlamp and flashlight, you truly have 2
products in one. While using the flashlight
you should use the flashlight power
button; however, if the flashlight battery
is depleted, you can use the headlamp
power button while still in the flashlight
configuration (providing headlamp
battery has power). If your headlamp is
out of charge, simply use the flashlight
configuration with the flashlight power
button.
Charge via solar
• With solar panel side up, place headlamp in
direct sunlight for up to 8 hours for full charge.
Charge via USB
• Insert the USB cord provided into the USB
port on the headlamp, and then insert the
other end into a USB outlet for 2 hours.
• Ensure the cord is firmly in position and
check that the battery level indicator light
is on - this means it's charging.
• Battery level indicator will illuminate
orange while charging via USB, and will
change to green once fully charged.
Headlamp configuration
•
Detach the headlamp body and headlamp
mount from the flashlight body .
• Connect the headlamp body and headlamp
mount together, and voila!
• To shine, simply press the headlamp power
button. 1 click for white low mode, 2 clicks
for white medium, 3 clicks for white high, 4
clicks for white flashing, 5 clicks for red low
mode, 6 clicks for red high, 7 clicks for red
flashing, 8 clicks to turn off,
or hold for 2
seconds at any time to turn off.
Flashlight configuration
• Simply reconnect the headlamp body and
mount to the flashlight body and you have
your flashlight!
• To shine, simply press the flashlight power
button. 1 click for white low mode, 2 clicks
for white medium, 3 clicks for white high, 4
clicks for white flashing, 5 clicks for red low
mode, 6 clicks for red high, 7 clicks for red
flashing, 8 clicks to turn off,
or hold for 2
seconds at any time to turn off.
General charging note: Both the Headlamp
and Flashlight body contain built-in
rechargeable batteries. While the USB port
is on the headlamp body, this will charge
both the Headlamp and Flashlight. The same
applies for charging via the solar panel. The
flashlight battery also has the capability to
charge the headlamp battery. To do this,
connect the Headlamp to the Flashlight, and
hold the flashlight power button for 3 secs.
The headlamp battery level indicator will
light up to inform you that it's charging.
Shine straight ahead, position the beam
facing downwards, or anywhere in between
with the Adjustable 90º Performance Pivot.
To adjust, simply open the pivot from the
top and tilt to your desired length.
How to use
2
90º Pivot