10
EN
BASE ASSEMBLY
1.
Place the speed switch housing (6) in the base (4).
2.
Tighten both parts on the underside with the four screws provided with the fan.
USE OF A FAN
CAUTION! Before switching on, make sure that the fan is standing on a flat, stable and dry surface!
1.
Connect the device to a power source.
2.
Set the desired speed, which is regulated by the following switches:
“0” – off, “1” - speed \ “2” – speed II.
3.
To activate the rotating fan operation, press the rotating button (8) on the motor housing.
4.
To change the angle of the propeller and thus the angle of the air stream, simply tilt the fan
head while holding the fan base with the other hand to prevent the fan from tipping over.
CLEANING AND MAINTENANCE
1.
Before cleaning, first disconnect the unit from the power supply.
2.
The motor housing, switch housings, stand and desk fan cross member can be cleaned with
a damp cloth and a little detergent.
3.
Mesh housings and can be wiped down with a brush from time to time to remove any dust
in the openings.
4.
After unscrewing the propeller, it can also be wiped with a damp cloth with some detergent.
Product data sheet:
MPM AGD S.A.
MODEL: MWP-23
Description
Symbol
Value
Unit
Maximum fan flow rate
F
17,79
m
3
/min
Fan power
P
20,60
W
Operating value
SV
0,86
(m
3
/min)/W
Standby power consumption
P
SB
0
W
Fan sound power level
L
WA
55,2
dB(A)
Maximum air speed
c
2,76
m/s
Seasonal electricity consumption
Q
6,59
kWh/a
Standard for the measurement of
in-service value
IEC 60879:1986
For further information, please contact
MPM AGD S.A.
ul. Brzozowa 3
Milanówek 05-822, Poland
Phone (22) 380-52-00
BDO [waste database]: 000027599
