9
EN
Do not switch on the device until it is fully assembled. A partially assembled and
commissioned device does not ensure safe and correct operation.
WARNING! Do not allow children to play with the film. Danger of
suffocation!
For the safety of children, please do not leave freely accessible parts of the
packaging (plastic bags, cardboard boxes, polystyrene, etc.).
DEVICE DESCRIPTION
1.
Decorative panel
2.
Front mesh propeller
housing
3.
Propeller
4.
Protective nut for rear
housing
5.
Rear propeller mesh
housing
6.
Motor shaft
7.
Motor housing
8.
Rotary button
9.
Fan foot
10.
On/off and speed switches
11.
Base
PREPARING THE DEVICE FOR OPERATION
CAUTION! Fans must stand on stable, flat and dry surfaces!
1.
Remove all protective films from the fan components.
2.
Unscrew the protective nut of the rear propeller mesh housing (9), located at the front of the
motor housing (7).
3.
Fit the rear propeller mesh housing (8) with the handle upwards, matching the holes with the
pins on the motor housing. Screw on the protective nut (9), making sure that these compo-
nents are installed accurately.
4.
Remove the protective sleeve from the motor shaft (6).
5.
Put a safety band on the propeller shaft (3). Then install the propeller carefully on the motor
shaft (6) and screw the propeller protection nut (2) counterclockwise.
6.
Fit the front propeller mesh housing (2) by attaching a keyed hook to the rear propeller mesh
housing (5). Ensure that the holes for the fastening screw in the front and rear propeller mesh
housing (12) are aligned with each other.
7.
Close the retaining hooks (11).
8.
Screw the propeller mesh housings together using a fixing bolt and nut.
