MPC B-2354-111, Инструкция

Страница: 11 / 13

Once all wiring and programming are done, you should test the system to make sure everything is
working properly before you close up the installation.
1. With the key removed from the ignition, press the lock button on the vehicle factory remote
three times in succession. Timing is important! Pressing the lock button too fast or too slow will not
activate the system. The presses should be about 1 second apart.
If everything has been installed and programmed correctly, a few seconds later the gauges will
power up and the parking lights (if connected) will flash, and a few more seconds later the vehicle
will start.
2. Make sure the vehicle stays running, and that the climate controls are working.
The engine will remain running for the programmed run time or until the brake pedal is pressed. If
your factory remote stays operational while the vehicle is running (on some vehicles it does not),
Page 11 of 13