![background image](http://html1.mh-extra.com/html/mpb/sep/sep_user-manual_1843006032.webp)
USER MANUAL
S E M S
- 32 -
the start to the bandwidth, set in the top part of the control. The CP later added will
start from the stop of the previous one. Assuming the case where the
span
of the
scansion is of 40 MHz, and the width of the CP to add is 80 MHz, only by activating 5
CP it will be possible to divide the whole scansion in 5 measuring bands. Reached the
end of the scan, the software will not add further CP. It is however possible to edit the
modification of the single start and stop from every CP. In the bottom of the panel, the
number of the created CP components is available, together with the RMS of each
measured value for each channel. The last button on the bottom is the “Export as .csv”:
the software will prompt for a “Save file dialog”, so the user can select the file name
and the path preferred. In this files will be stored all channels’ information and the total
value. Please remember that the MCP total is the RMS summation of all the CP.
Figure 27 Limits
Also in the “Limit” tab as in the “MCP” one, the “Max Hold”, “Average” and “RMS”
measurements can be enabled only if they were enabled in the axis selection. The
“Shown Values” (please note that in the current Software version are allowed up to
30 values in the same scansion) combobox will be by default set on “Over limits”: it
means that the software will list all peak values for CW signal over the selected
limits. For wide-band signal the software will provide the central frequency and the
channel power measurement. The total contribution to the electric field in the
environment is also evaluated according to the formula:
∑
=
𝑡𝑜𝑡
√∑ 𝐸
𝑖
2
𝑖
The “Shown Values” will be also populated with the “Single frequencies list” created
by the user through the “Personal DB form” (see 4.5.2). The dropdown will be
populated with the name of the preferred “Single Frequencies list files”, that will be
calculated only in case the selected frequency belongs to the appearing frequency
range: the calculation will be performed only for the frequencies inside the spectrum,
Содержание SEP
