MP Systems AK CB20 Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 81

MP Systems AK CB20 Скачать руководство пользователя страница 55

49

MPSYSTEMS-M-001/06

9.5.

MP 1200 Mist Collector (MC)

The MP 1200 Mist Collector is used to remove unwanted mist and vapors created by spraying fluid at
high velocity in the machine tool cabinet. The MP 1200 aids in keeping unwanted mist/vapor from
entering the work environment around the machine tool. Not only does the MP 1200 keep the air in
the work place much cleaner, it has the potential to save money by recycling wasted fluid that would
have ended up in the air, back to the machine tool reservoir.

The MP 1200 consists of 3 filtering components and 1 optional post HEPA filter add-on that can be
mounted to the top of the MP 1200. The first component in the MP 1200 is the impinger (re-usable),
this component allows the unit to separate out the heavier liquid particles. The second component, a
2” thick wire mesh screen (re-usable) that aids in removing the residual heavy liquid particles. The
final and most important component of the MP 1200 is the 19” x 23” x 12” high capacity, high
efficiency filter (expendable) that brings its efficiency up to 95%.

The optional post HEPA filter (expendable) can bring efficiency to 99.7%.

9.5.1.

Control Signal Options (MC)

Please refer to MP 1200 Mist Collector installation guide, supplied with MP 1200,
for mounting & power installation instructions.

MP 1200
Control Options

Instructions

Standard Control

MP 1200 will run at set speed (dial on unit) when high pressure is active.
Once high pressure becomes de-activated MP 1200 will run at full speed
for 20 seconds, to clear remaining mist/vapor from machine tool cabinet.

MP 1200 settings can be modified through R Series PLC, please refer to

Section 7.4: Settings

.

M-Code Control



Latching M-Codes

o

MP wire #12 (ON/OFF)

o

MP wire #9 (+24VDC) common



Pulsing M-Codes

o

MP wire #12 (ON)

o

MP wire #13 (OFF)

Flood Coolant
Control



MP wire #9 (+24VDC) common



MP wire #12 (ON/OFF)

A dry contactor must be used, no other machine tool wires may be
present.



MP wire #9 on Terminal 13



MP wire #12 on Terminal 14

Refer to

Section 7.4. Settings

to modify PLC to allow for M-Code Control or Flood Coolant

control.

Wire numbers are subject to change. Please refer to AE GEN SGNL, attached to signal
harness supplied in installation kit.

«
...
53
54
55
56
57
...
»

Содержание AK CB20


















































































Отзывы:

Нет отзывов