Moyer Diebel MD2000-HR, Инструкция по установке, эксплуатации и ремонту

Страница: 20 / 48

Set-up
1.
Remove any protective film from dishwasher.
Check the interior for foreign material.
2.
Make sure the dishwasher is permanently located.
3.
Make sure all utility connections are complete.
4.
Make sure the chemical supply containers are full.
5.
Make sure the pump suction screen is in place.
6.
Make sure the drain screen is clean and unobstructed by debris.
7.
Make sure the scrap screen filler plate and scrap screens
are installed and firmly seated.
8.
Make sure the spray arms are in place and that they spin freely.
The spray arms are interchangeable.
9.
Make sure the doors operate smoothly without binding.
10.
Turn cold water supply on and check for leaks.
Make sure the pump suction strainer is in place.
Make sure the scrap screen plate is mounted in the center of
the wash tank and separating the scrap screens.
Make sure the scrap screens are in place.
Make sure the drain screen is
unobstructed.
Set-up Check List
Fig. 14
12