Moyer Diebel MD2000-HR, Инструкция по установке, эксплуатации и ремонту

Страница: 10 / 48

Installation
Converting Straight-through to Corner Operation
Machines are shipped from the factory for Straight-through operation. Refer to the diagrams below and on
the next page to convert a Straight-through machine to a Corner operation. Dish racks enter and exit the sides
of a straight-through machine. They enter the side and exit the front on corner operation machines.
To convert the dishwasher:
1. Convert the dishwasher before it is placed in its final position and before connecting utilities.
2.
The temperature gauges must be clearly visible to the operator when facing the front of the machine.
Door handles should move freely without interference from walls or other obstructions. Nominal wall
clearance is 6" [152mm]; the minimum wall clearance is 4" [102mm].
3. Position the dishwasher as shown below. See the next page for to change the dish rack guides.
6" [15cm]
Temp.
Gauges
Correct Orientation for
Corner Operation
6" [15cm]
Temp.
Gauges
Incorrect Orientation for
Corner Operation
6" [15cm]
Temp.
Gauges
Correct Orientation for
Straight-Through Operation
Fig. 2
2