UC-8100-ME-T Series Hardware User Manual
15
Inserting the SD and SIM Card
The UC-8100-ME-T comes with an SD-card socket for storage expansion, and a SIM-card socket that can be
used to install a SIM card for cellular communication. The SD card/SIM card sockets are located on the
lower part of the front panel. To install the cards, remove the screw and the protection cover to access the
sockets, and then plug the SD card and the SIM card into the sockets directly. Remember to push in on the
SD card or SIM card first if you want to remove them.
The SD card will be mounted at:
/mnt/sd
ATTENTION
The UC-8100-ME-T does not support SD-card hot swap or PnP (Plug and Play) functionality. You must
disconnect the power source to the computer before you insert or remove the SD card.
USB Port
The UC-8100-ME-T is provided with 1 USB 2.0 full speed port (OHCI), type A connector, which supports a
keyboard or mouse, as well as an external flash disk for storing data.