TAP-125-U-W-X-Z
(YYYYYYYY)
Introduction
1-5
LED Indicators
The LEDs on the front panel of the TAP-125-U-W-X-Z (YYYYYYYY) provide a quick and easy means of
determining the current operational status and wireless settings.
The FAULT LED is used to indicate system failures. If the TAP-125-U-W-X-Z (YYYYYYYY) cannot initialize the
wireless module (5/2.4 GHz), the FAULT LED will blink at one second intervals. If the TAP-125-U-W-X-Z
(YYYYYYYY) cannot boot correctly or there are some system errors, the FAULT LED will be steady on.
LED
Color
State
Description
PWR
Green
ON
Power is being supplied
OFF
No power supply
FAULT
Green
ON
Reserved
Blinking
Reserved
OFF
Reserved
Red
ON
Device is booting up, system configuration error, or system
boot-up error
Blinking
(slow at 1-sec intervals)
Cannot get an IP address from the DHCP server
Blinking
(fast at 0.5-sec intervals)
IP address conflict
OFF
There are no error conditions
STATE
Green
ON
Software is ready
Blinking
Reserved
OFF
The TAP-125 is running normally
Red
ON
The device is booting up or there is an error condition
Blinking
Wi-Fi module initialization error
(OS and file system boot-up is OK)
OFF
N/A
WLAN
Green
ON
Reserved
Blinking at 1-sec
intervals
Data transmitted at 5 GHz
OFF
No data transmitted at 5 GHz
Amber
Amber ON
Reserved
Blinking
Data transmitted at 2.4 GHz
OFF
Reserved
5 G/2.5 G
Green
ON
5 G Ethernet is connected
Blinking
N/A
OFF
5 G Ethernet is not connected
Amber
ON
2.5 G Ethernet is connected
Blinking
N/A
OFF
2.5 G Ethernet is not connected
1G/100M
/10M
Green
ON
10/100/1000 Mbps Ethernet is connected
Blinking
N/A
OFF
Reserved
Amber
ON
Reserved
Blinking
N/A
OFF
Reserved
TRAFFIC
Green
ON
Reserved
Blinking
Ethernet traffic present
OFF
Reserved
Amber
ON
Reserved
Blinking
Reserved
OFF
Reserved
