TAP-125-U-W-X-Z
(YYYYYYYY)
Web Console Configuration
3-23
System Log
System Log Event Types
Detail information for grouped events is shown in the following table. You can check the box for Enable
logging to enable the grouped events. All default values are enabled (checked). The log for system events can
be seen in Status
System Logs.
System-related events
Event is triggered when…
System restart (warm start)
The TAP-125-U-W-X-Z (YYYYYYYY) is rebooted, such as when its
settings
are changed (IP address, subnet mask, etc.).
Network-related events
Event is triggered when…
LAN link on
The LAN port is connected to a device or network.
LAN link off
The port is disconnected (e.g., the cable is pulled out, or the
opposing device shuts down).
Client joined/ left
A wireless client is associated or disassociated.
Config-related events
Event is triggered when…
Configuration Changed
A configuration item has been changed.
Configuration file import via Web Console The configuration file is imported to the TAP-125-U-W-X-Z
(YYYYYYYY).
Console authentication failure
An incorrect password is entered.
Firmware upgraded
The TAP-125-U-W-X-Z (YYYYYYYY)’s firmware is updated.
Syslog
This function provides the event logs for the Syslog server. The function supports up to three configurable
Syslog servers and Syslog server UDP port numbers. When an event occurs, the event will be sent as a Syslog
UDP packet to the specified Syslog servers.
Syslog Event Types
Detail information for the grouped events is shown in the following table. You can check the box for Enable log
to enable the grouped events. All default values are enabled (checked). Details for each event group can be
found on the “System log Event Types” table on page 3-31.
