—
17
—
DIN-Rail Mounting for SPL-24
The plastic DIN-Rail attachment plate should already be fixed to the back
panel of SPL-24 when you take it out of the box. If you need to reattach the
DIN-Rail attachment plate, make sure the stiff metal spring is situated towards
the top, as shown in the figures below.
STEP 1:
Insert the top of the DIN-Rail into the
slot.
STEP 2:
The DIN-Rail attachment unit will snap
into place as shown below.
DIN-Rail
DIN-Rail
DIN-Rail
To remove the SPL-24 from the
DIN-Rail, insert a flat-blade screw
driver horizontally into the DIN-Rail
kit under the SPL-24, and then pull it
upwards and release SPL-24 towards
you away from the DIN-Rail.
Grounding the SPL-24
Top View
Front View
Grounding and wire routing help limit the effects
of noise due to electromagnetic interference (EMI).
Run the right most contact of the 3-contact
terminal block to the grounding surface prior to
connecting devices.
ATTENTION
This product is intended to be mounted to a well-grounded
mounting surface, such as a metal panel.
