—
13
—
NOTE
You must enable the Turbo Ring function first before using the DIP
switch to activate the Master and Coupler functions.
NOTE
If you do not enable any of the EDS-P510 switches to be the Ring
Master, the Turbo Ring protocol will automatically choose the
EDS-P510 with the smallest MAC address range to be the Ring
Master. If you accidentally enable more than one EDS-P510 to be
the Ring Master, these EDS-P510 switches will auto-negotiate to
determine which one will be the Ring Master.
LED Indicators
The front panel of the Moxa EDS-P510 contains several LED indicators. The
function of each LED is described in the following table:
LED
Color
State
Description
On
Power is being supplied to power input
P1.
PWR1
AMBER
Off
Power is
not
being supplied to power
input P1.
On
Power is being supplied to power input
P2.
PWR2
AMBER
Off
Power is
not
being supplied to power
input P2.
On
When a user-configured event is
triggered.
FAULT
RED
Off
When a user-configured event is not
triggered.
On
When the EDS-P510 is the Master of
this Turbo Ring
MASTER
GREEN
Blinking
When the EDS-P510 is Ring Master of
this Turbo Ring and the Turbo Ring is
broken.
On
When the EDS-P510 enables the
coupling function to form a back-up
path.
COUPLER
GREEN
Off
When the EDS-P510 disables the
coupling function.
On
TP port’s 10 Mbps link is active.
Blinking Data is being transmitted at 10 Mbps.
Port1~Port7
(10M)
AMBER
Off
TP port’s 10 Mbps link is inactive.
On
TP port’s 100 Mbps link is active.
Blinking Data is being transmitted at 100 Mbps.
Port1~Port7
(100M)
GREEN
Off
TP port’s 100 Mbps link is inactive.
G1~G3
AMBER
On
G1~G3 port’s 10/100Mbps link is active.
