Moxa Technologies EtherDevice EDS-510A Series Скачать руководство пользователя страница 77 | Manualshive

Страница: 77 / 127

background image

EDS-510A Series User’s Manual

Featured Functions

3-62

NOTE

The physical network can have a maximum of 64 VLAN settings.

Using Multicast Filtering

Multicast filtering improves the performance of networks that carry multicast traffic. This section
explains multicasts, multicast filtering, and how multicast filtering can be implemented on your
EDS-510A.

The Concept of Multicast Filtering

What is an IP Multicast?

A

multicast

is a packet sent by one host to multiple hosts. Only those hosts that belong to a

specific multicast group will receive the multicast. If the network is set up correctly, a multicast
can only be sent to an end-station or a subset of end-stations on a LAN or VLAN that belong to
the multicast group. Multicast group members can be distributed across multiple subnets, so that
multicast transmissions can occur within a campus LAN or over a WAN. In addition, networks
that support IP multicast send only

one

copy of the desired information across the network until

the delivery path that reaches group members diverges. To make more efficient use of network
bandwidth, it is only at these points that multicast packets are duplicated and forwarded. A
multicast packet has a multicast group address in the destination address field of the packet’s IP
header.

Benefits of Multicast

The benefits of using IP multicast are that it:



Uses the most efficient, sensible method to deliver the same information to many receivers

with only one transmission.



Reduces the load on the source (for example, a server) since it will not need to produce

several copies of the same data.



Makes efficient use of network bandwidth and scales well as the number of multicast group

members increases.



Works with other IP protocols and services, such as Quality of Service (QoS).

Multicast transmission makes more sense and is more efficient than unicast transmission for some
applications. For example, multicasts are often used for video-conferencing, since high volumes of
traffic must be sent to several end-stations at the same time, but where broadcasting the traffic to
all end-stations would cause a substantial reduction in network performance. Furthermore, several
industrial automation protocols, such as Allen-Bradley, EtherNet/IP, Siemens Profibus, and
Foundation Fieldbus HSE (High Speed Ethernet), use multicast. These industrial Ethernet
protocols use publisher/subscriber communications models by multicasting packets that could
flood a network with heavy traffic. IGMP Snooping is used to prune multicast traffic so that it
travels only to those end destinations that require the traffic, reducing the amount of traffic on the
Ethernet LAN.

«
...
75
76
77
78
79
...
»

Содержание EtherDevice EDS-510A Series
































































































































Отзывы:

Нет отзывов

Похожие инструкции для EtherDevice EDS-510A Series

Бренд: GE Страницы: 93

Бренд: NEC Страницы: 47

Бренд: F5 Страницы: 2

Бренд: F5 Страницы: 90

Бренд: F5 Страницы: 47

SCSI PC Card REX-9530V

Бренд: Ratoc Systems Страницы: 30

Бренд: Aztech Страницы: 2

Бренд: Longshine Страницы: 27

Бренд: Eicon Networks Страницы: 32

Бренд: Lutron Electronics Страницы: 4

Бренд: Razer Страницы: 17

Бренд: Topcom Страницы: 16

CORE 2 DUO E4000 - 3-2008

Бренд: Intel Страницы: 122

NC-MCO - TECHNICAL

Бренд: Crest Audio Страницы: 2

Бренд: Digisol Страницы: 73

Xtreme Networked Boat

Бренд: Broadband Products Страницы: 16

SATA II-150 PCI

Бренд: SIIG Страницы: 16

Бренд: Patton electronics Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды