—
3
—
Package Checklist for EDS-P308
The MOXA EDS-P308 is shipped with the following items. If any of these
items is missing or damaged, please contact your customer service
representative for assistance.
y
MOXA EtherDevice™ Switch EDS-P308
y
Hardware Installation Guide
y
MOXA Product Warranty Statement
y
Protective caps for unused ports
Features of EDS-P308
High Performance Network Switching Technology
y
10/100BaseT(X) (RJ45)
y
IEEE802.3/802.3u/802.3x
y
Store and Forward switching process type, with 1024 address entries
y
10/100M, Full/Half-Duplex, MDI/MDIX auto-sensing
y
Provides up to 15.4 watts per PoE port
y
Active circuit protection
y
Auto disconnection for over voltage or under voltage
y
Power consumption detection and classification
Industrial Grade Reliablity
y
Power failure, port break alarm by relay output
y
Redundant dual DC power inputs
Rugged Design
y
Operating temperature range from 0 to 60°C, or extended operating
temperature from -40 to 75°C for “-T” models
y
IP30, rugged high-strength case
y
DIN-Rail or panel mounting ability
Specifications of EDS-P308
Technology
Standards
IEEE802.3, 802.3u, 802.3x, 802.3af
Forward and Filtering
Rate
148810 pps
Packet Buffer Memory 256 KB
Processing Type
Store and Forward, with IEEE802.3x full duplex,
back pressure flow control
Address Table Size
1,000 uni-cast addresses
Latency
Less than 5
μ
s
Interface
RJ45 Ports
10/100BaseT(X) auto negotiation speed, F/H duplex
mode, and auto MDI/MDI-X connection
LED Indicators
Power, Fault, 10/100, PoE
DIP Switch
Port break alarm mask
Alarm Contact
One relay output with current carrying capacity of
0.5A @ 48 VDC