—
13
—
Mounting Dimensions (unit = mm)
24.87
Front View
Side View
Rear View
Top View
86.5
74
15
32
100
100
10.5
76.2
74
24.87
: 24 VDC
OUTPUT
V+
DATA OUT
PoE IN
P
DIN-Rail Mounting for SPL-24
The plastic DIN-Rail attachment plate should already be fixed to the back
panel of SPL-24 when you take it out of the box. If you need to reattach the
DIN-Rail attachment plate, make sure the stiff metal spring is situated towards
the top, as shown in the figures below.
STEP 1
:
Insert the top of the DIN-Rail into the
slot.
STEP 2
:
The DIN-Rail attachment unit will
snap into place as shown below.
To remove the SPL-24 from the
DIN-Rail, insert a flat-blade screw
driver horizontally into the DIN-Rail
kit under the SPL-24, and then pull it
upwards and release SPL-24 towards
you away from the DIN-Rail.
