- 5 -
NOTE
Test the screw head and shank size by inserting the screws into
one of the keyhole shaped apertures of the wall-mounting
plates before they are fixed to the wall.
Do not drive the screws in all the way
—
leave a space of about 2 mm to
allow room for sliding the wall-mounting panel between the wall and
the screws.
STEP 3:
Once the screws are fixed into the wall, insert the four screw heads
through the large opening of the keyhole-shaped apertures, and then
slide the AWK-4252A downwards, as indicated on the right. Tighten the
four screws for added stability.
DIN-rail Mounting (Optional)
Mount the AWK-4252A onto a corrosion-free mounting rail that adheres
to the EN 60715 standard.
STEP 1:
Insert the upper lip of the DIN-rail
kit into the mounting rail.
STEP 2:
Press the AWK-4252A towards the
mounting rail until it snaps into
place.
