Moxa Technologies AWK-4252A Series, Быстрое руководство по установке

Страница: 12 / 25

- 12 -
LED Indicators
The front panel of the AWK-4252A contains several LED indicators. The
function of each LED is described in the table below:
LED Color State Description
Front Panel LED Indicators (System)
PWR1 Green
On
Power is being supplied from power
input 1, 2, or PoE.
Off Power is not being supplied.
LAN1
Green
On LAN port’s 1000 Mbps link is active.
Blinking
Data is being transmitted at 1000
Mbps.
Off LAN port’s 1000 Mbps link is inactive.
Amber
On LAN port’s 100 Mbps link is active.
Blinking Data is being transmitted at 100 Mbps.
Off LAN port’s 100 Mbps link is inactive.
LAN2
Green
On LAN port’s 1000 Mbps link is active.
Blinking
Data is being transmitted at 1000
Mbps.
Off LAN port’s 1000 Mbps link is inactive.
Amber
On LAN port’s 100 Mbps link is active.
Blinking Data is being transmitted at 100 Mbps.
Off LAN port’s 100 Mbps link is inactive.
2.4G
Green
On
Device is in Client/Client-Router/Slave
mode and has established a Wi-Fi
connection to an AP with a SNR value of
35 or higher.
Blinking
Data is being transmitted over the 2.4
GHz band.
Amber
On
Device is in Client/Client-Router/Slave
mode and has established a Wi-Fi
connection to an AP with a SNR value of
less than 35.
Blinking
Data is being transmitted over the 2.4
GHz band.
5G
Green
On
Device is in Client/Client-Router/Slave
mode and has established a Wi-Fi
connection to an AP with a SNR value of
35 or higher.
Blinking
Data is being transmitted over the 5
GHz band.
Amber
On
Device is in Client/Client-Router/Slave
mode and has established a Wi-Fi
connection to an AP with a SNR value of
less than 35.
Blinking
Data is being transmitted over the 5
GHz band.
SYS
Red
On System configuration error.
Blinking System is booting up.
Green
On
System startup completed and is
operating normally.
Blinking
Device has been located by the Wireless
Utility (interval: 1s).