
378
Appendix
Problem
Cause and Remedy
Page
P
Make sure the battery is attached to the phone correctly.
P
Make sure the battery is fully charged.
P
Make sure Key Dial Lock is deactivated.
P
Make sure Keypad Lock is deactivated.
P
Make sure Self Mode is deactivated.
P
Make sure the phone number contains an area code.
P
Enter the phone number after you hear the dial tone.
P
If “
圏外
” appears, move to a place where it disappears.
P
You may be outside the service area or weak signals are being
received.
P
You might cover the antenna with your hands.
P
Make sure that “Call w/ i-mode” is set to “Answer”.
P
Make sure that the setting for incoming calls during i-mode is not
“Forward to Voice Mail Service Center
”,
“Forward to specified number
”,
“Play busy tone
”.
P
The network lines are busy. Retry after a while.
“110”, “119”, and “118” can be dialed, but might not be connected
depending on the conditions.
P
Check the information and press
; then the display (literal
information) is cleared.
P
Make sure the battery is attached to the mova correctly.
P
Make sure the AC Adapter is firmly plugged into an AC outlet.
P
Make sure the AC Adapter Connector is firmly plugged into the mova
or the Desktop Holder.
P
Make sure the DC Adapter is firmly plugged into the Cigarette Lighter
Socket.
P
Make sure the DC Adapter Connector is firmly plugged into the mova.
P
This may be the mail from someone who belongs to the individual
Phonebook entry or the Phonebook group for which you have
separately set Mail Ring Tone.
P
If you have received Melody Mail, the pasted melody is played.
P
This may be the chat mail from a chat mail member.
P
This is because “Determinin’gtime” is not set to “OFF”.
P
If you do nothing for about 15 seconds, the main display dims and
then darkens about 5 minutes after.
P
If you do nothing for about 15 seconds with the mova closed, the sub
display dims and then the mova enters Power Save Mode after the
specified time (1~99 minutes) while Power Save Mode is set to “ON”.
P
You have missed calls or received mail, or message is recorded.
When “Missed-call LED” is set to “ON”, the Call Indicator flickers to
indicate them.
31
34
113
114
118
40
–
35
35
19
177
329
333
40
40
31
33
68
76
214
88
347
105
103
109
The mova cannot be turned on.
(The mova cannot be used.)
Calls cannot be made by pressing keys.
After dialing, the busy tone sounds
and the attempt fails.
“
圏外
” appears and the busy tone
sounds.
Calls cannot be taken during i-mode.
The Japanese message “
タダイマタイ
ヘンコミアッテイマス
” (Lines are busy.)
is displayed. (Literal information)
Message display cannot be cleared.
(Literal information)
The battery cannot be charged.
(Charging Indicator does not light.)
A different ring tone sounds when mail
is received.
Characters are fixed arbitrarily.
The main display is dark and difficult to
read.
The sub display is dark and difficult to
read.
The Call Indicator flickers at a certain
cycle.
Troubleshooting
Содержание P253i
