4
ASSEMBLING THE BUMPER/SAFETY BAR
1) Pivot the padded Safety bar into the horizontal position so that the bar is sitting in front of the
harnessed child.
2) Secure the padded Safety bar into position by connecting the buckles of the flap which folds
over and around the centre of the bar, between the child’s legs.
WARNING: Ensure your child is harnessed in at all times. Do not use the safety bar as a
safety mechanism to substitute for the 5-point safety harness.
FOLDING THE BUGGY
Standing in front of the Buggy, reach around the two chrome sliding arms (that joins the
frame sections) and pull out the two small black tri-knobs simultaneously. When both tri-
knobs are released simply start to push the Buggy away from you. Move your hands to the
top of the frame and continue folding until fully collapsed.
Warning:
Once the tri-knobs are released and the Buggy has begun to fold, move hands well away
to prevent any injury occurring.
Place your hands at the top of the main frame before folding the frame completely.
To prevent possible injuries always keep your children clear when folding your Buggy.
STROLLER ADJUSTMENTS
TO FASTEN, ADJUST AND RELEASE SAFETY HARNESS
The Everest Twin buggy provides a 5-point safety harness for each child;
1) To fasten the waist strap push both buckle ends into the crotch buckle.
2) Clip the shoulder straps to the centre buckle
3) Adjust the sliding buckles so that the harness straps are a firm fit
4) To release press the centre buckle.
Remember to adjust the shoulder and waist straps as your child grows.
Baby mattresses used with this product should conform to BS 1877
