Moulinex CE 430832, Руководство пользователя, Страница: 28 / 116

28
TROUBLESHOOTING AND REPAIR
Problem Possible reasons Solutions
Unable to open lid. Unable to open because of
pressure in the cooking pot. a. Wait for the pressure in
the pot to be completely
released.
b. Press and hold the
pressure release button.
Pressure in the pot is fully
released but the float valve
is stuck because it is too
dirty, and therefore unable
to fall. a. Once the product is cold,
please use a stick to poke
the float valve, to make it
fall down.
b. For next use, please clean
and wipe the float valve
- fig. 32 .
Unable to close lid. Sealing gasket is not
properly installed. Install the sealing gasket
properly.
The float valve is stuck
because it is too dirty, and
therefore unable to fall. a. Once the product is cold,
Please use a stick to poke
the float valve, to make it
fall down.
b. For next use, please clean
and wipe the float valve
- 32
.
Direction at which lid was
closed is incorrect. Close lid in the correct
direction according to the
instruction manual.
Intense release of pressure
from pressure limit valve. Faulty pressure control
resulted in release of
pressure. Send to repair and
maintenance department.
Pressure limit valve did not
fall into place. Carefully rotate/press the
pressure limit valve to make
it fall into place.