EN-10
PACER
Press MODE button and enter Pacer mode
(PACE).
The pace digit flashes (e.g. F-10).
Press SPLIT/RESET to change the digit (from 10 to
330). Press START/STOP to confirm and start the
pacer. The middle line shows repeats count (C- ).
The lower line shows the pace set (F- ).
Press START/STOP button to pause and restart
the pacer. Press START/STOP and then SPLIT/
RESET to stop and reset the count.
It is also possible to enter setting mode by
pressing and holding SPLIT/RESET.
TALLY COUNTER
Press MODE button and enter “Tally Count”
mode.
Press START/STOP or SPLIT/RESET to increase
unit count.
Press and hold S4 button to reset unit count.
ALARM
Press MODE button and enter Alarm mode
(ALM).
Setting
- Press and hold SPLIT/RESET to enter
setting mode. The hour digit flashes. Press
START/STOP to increase the value.