Technaxx
®
Video Watch Actionmaster 8GB
User Manual
The Declaration of Conformity for this device is under the Internet link:
www.technaxx.de/
(in bottom bar
“Konformitätserklärung”). Before using the device the first time, read the user manual carefully.
Service phone No. for technical support: 01805 012643 (14 cent/minute from German fixed-line and 42
cent/minute from mobile networks). Free Email: [email protected]
1. Charging
1.1.
Charging the built-in Lithium battery either by connecting the USB interface of the watch with
the USB port of a computer/notebook or with the AC adapter.
1.2.
If the watch is connected, the red LED lights up briefly.
1.3.
During charging, the red LED lights constantly and the blue LED flashes. [Therefore both
LEDs are located next to each other, it looks for the viewer as if a violet LED flashes. However,
this is a colour mix only.]
1.4.
When the watch is fully charged after approx. 2 – 2,5 hours, the red LED and blue LED are
lighting constantly. [Therefore both LEDs are located next to each other, it looks for the viewer as
if a violet LED flashes. However, this is a colour mix only.]
2. Low battery power
If the battery power is too low while recording a video or taking pictures, the blue LED flashes
quickly. Before the camera turns off automatically, the files will be saved.
3. Buttons
4. Turning ON the camera
Press and hold down the Power/Video button for 2 seconds. The red LED lights up briefly. Then
the red LED turns off while the blue LED is lighting. That indicates power on and standby mode
of the watch.
1
Power
button
Press and hold down the button to
turn on / to turn off
Video button Press shortly the button to take a
video
2
Photo button
Press shortly the button to take a
picture
3
USB interface
4
Camera lens
5
Microphone
6
LED indicator (small window)
7
Time setting
