MOTU 8pre Скачать руководство пользователя | Manualshive

Страница: 53 / 68

background image

M O T U C U E M I X C O N S O L E

53

Master fader

The master fader (Figure 11-1) controls the overall
level of the mix (its volume on its stereo output).
Use the individual input faders to the left to control
individual input levels.

Output level meters

The OUT level meters show you the output for the
mix’s physical output, which may include audio
from your host audio software. The clip indicators
clear themselves after a few seconds.

Input section

The channel strips to the left of the master fader
represent each input in your 8pre. Use the input
scroll bar to view additional inputs.

Input mute/solo

To add an input to a mix, or remove it, click its
MUTE button. To solo it, use its SOLO button. To
toggle these buttons for a stereo pair, hold down
the control key while clicking either channel. The
Solo indicator LED (Figure 11-1) lights up when
any input is soloed (including inputs that may
currently be scrolled off-screen).

Input volume and pan

Use the input fader and pan knob (Figure 11-1) to
adjust these settings for the input in the mix. Again,
all settings within the gray-shaded channel strip
area belong to the mix currently being viewed.
Note that an input can have different settings in
different mixes.

To adjust the volume or panning for a stereo input
pair, hold down the control key while dragging the
fader or knob for either the left or right input.

SHORTCUTS

Hold down the following modifier keys as
shortcuts:

COPYING & PASTING (DUPLICATING)
ENTIRE MIXES

To copy and paste the settings from one mix to
another:

1

Select the source mix (Figure 11-1) and choose

Copy from the file menu (or press control-C).

2

Choose the destination mix and choose Paste

from the file menu (or press control-V).

MESSAGE CENTER

The Message Center displays fly-over help for items
in the CueMix Console window. It also displays
messages regarding the overall operation of the
8pre.

SAVING AND LOADING PRESETS

The 8pre can store up to 16 presets in its on-board
memory. A preset includes of all CueMix DSP
settings for all for mix busses, but it excludes global
settings like clock source and sample rate.

The

Load Preset

and

Save Preset

commands in the

CueMix Console file menu let you name, save and
load presets in the 8pre.

SAVING AND LOADING PRESETS TO/FROM
DISK

The

Save

and

Load

commands in the CueMix

Console File menu allow you to save 8pre presets to
and from your hard drive. This allows you to save
an unlimited number of 8pre presets on disk. (Use

Shortcut

Result

Shift key

Applies your action to all inputs in the mix.

Control key

Applies your action to the stereo input pair

Space bar

Applies your action to all busses

Double-click

Returns the control to its default value (pan
center, unity gain, etc.)

«
...
51
52
53
54
55
...
»

Содержание 8pre





































































Отзывы:

Нет отзывов

Похожие инструкции для 8pre

Express5800/320Ma

Бренд: NEC Страницы: 74

Powered RS-232 2-Port PCI Card

Бренд: National Instruments Страницы: 11

Бренд: kowatec Страницы: 4

Бренд: Datapath Страницы: 2

Бренд: Advantech Страницы: 6

Бренд: 3Com Страницы: 8

Бренд: StarTech.com Страницы: 11

Бренд: StarTech.com Страницы: 12

Бренд: Wasco Страницы: 32

OPTOIO-PCIe32 STANDARD

Бренд: Wasco Страницы: 34

Бренд: Wasco Страницы: 35

Z-DRIVE R2 P84 1T PCI-EXPRESS SSD

Бренд: OCZ Страницы: 2

Бренд: Omega Страницы: 53

PCard-E 041L-D4 Series

Бренд: ORiNG Страницы: 2

Бренд: Aim Страницы: 39

Бренд: Datapath Страницы: 2

Бренд: Rosewill Страницы: 1

Бренд: Rosewill Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды