MOTU 24Ai, Руководство пользователя

Страница: 20 / 92

M O T U A V B C O N T R O L W E B A P P
20
MAIN MIX AND MONITOR CHANNEL STRIPS
1
5
To access the Main Mix and Monitor
channel strips, go to the Mixing tab
(page 17) and scroll the display to the
right, beyond the inputs and groups.
To show and hide sections of the channel
strip, such as EQ or the Leveler, use the
Controls section of the side bar (item #3 in
the Mixing tab on page 17).
1. By default, the Monitor bus serves as
a solo bus. However, it can be set to
mirror the main mix bus, or any other
aux bus, group, or the reverb bus, in
addition to monitoring solo. Make
this choice in the source menu (12).
Use the Routing grid (page 16) to
specify the output for the Monitor
bus.
2. The Main Mix bus is the primary
stereo mix.
3. Provides hardware settings for any
assigned outputs that have them. For
example, if the Main Mix bus is
assigned to analog outputs on the
24Ao, you’ll see trim settings for the
outputs. This item is grayed out if
there are no hardware settings for
output.
4. Use this output assignment widget to
choose the destination — or multi-
ple destinations — for the bus. You
can also make this setting directly on
the Routing grid (page 16).
5. Use the preset menus to create save,
recall, and otherwise manage
channel strip presets for the Monitor
bus and Main Mix bus.
6. Indicates that the bus is stereo.
7. The four-band parametric EQ for the
Main Mix bus operates the same as
described for input channels (items
10 and 11 on page 19), including
High and Low Shelf filter options.
8. The Leveler provides specialized gain
reduction modeled after the legend-
ary Teletronix LA-2A Leveling Ampli-
fier. For complete details, see
“Leveler” on page 66.
9. Mutes for the Main Mix bus and
Monitor bus.
10. Master faders for the Main Mix bus
and Monitor bus. Use the same
techniques described for input
channel faders (items 16, 17 and 18
on page 19).
11. When Follow Solo is enabled, the
Monitor bus switches to the solo bus
when any channel is soloed. NOTE: if
an aux bus is soloed, then the Monitor
bus carries only the soloed aux bus
(any current channel solos are
excluded).
12. Choose the source for the Monitor bus
from this menu. It can mirror the
main mix, any aux bus, group, the
reverb bus, or it can serve only as a
Solo bus.
13. The SC button clears all solos.
14. This mid-band EQ is currently
disabled (and therefore grayed out).
13
7
8
9
10
12
11
2
14
3 4 5 6
3 4