MOTU 24Ai, Руководство пользователя

Страница: 54 / 92

T H E F R O N T P A N E L L C D
54
Device menu
The Device menu provides information about the
device, such as its name and connection mode
(USB or AVB).
Network menu
The Network menu displays the following
network-related information:
Settings menu
The Settings menu provides access to basic
hardware settings, such as Clock Mode, Sample
Rate, and so on.
Presets menu
The Presets menu lets you recall settings that have
been saved as a
device preset . Use the web app to
create and save presets (item # 7 in the “Device tab”
on page 14).
Version menu
The Version menu displays firmware version
information.
CLOCK
The Clock section of the LCD displays the sample
rate at which the unit is currently operating, and
the current Clock Mode setting (item #13 in the
Devices tab on page 14). The Clock Mode setting
can also be found (and changed) in the Settings
Menu.
ADAT SMUX TYPE
When your MOTU interface is operating at either
88.2 or 96 kHz, the
Settings menu > Optical setting
lets you configure ADAT SMUX type. There are
two choices:
■
Type I — interoperation with 3rd-party SMUX-
compatible hardware products
■
Type II — interoperation with compatible
MOTU products
STAND-ALONE OPERATION
All settings, including mix settings and device
settings, are saved in your MOTU interface’s
memory. They remain in effect even when the
interface is not connected to a computer. This
allows you to use your MOTU device as a stand-
alone mixer. You can make adjustments to any
setting at any time from the web app running on a
device that has a network connection to your
MOTU interface, as explained in “Setup for web
app control” on page 38.
Setting Explanation
Serial/UID Unique AVB network identifier that can be
used for troubleshooting.
IP address The unique network address for the unit.
Type this address into your web browser to
access the unit’s settings in the MOTU
AVB Control web app.
AVB Indicates whether AVB networking is cur-
rently enabled or disabled. For example,
AVB could be disabled because a non-AVB
switch is being used. When AVB is dis-
abled, audio streaming over the network is
disabled.
Setting What it does
Clock Mode Sets the digital audio clock source for the
device.
Sample Rate Sets the sample rate for the device.
Word Clock Thru
Mode Toggles the Word Clock Output between
OUT and THRU.
Optical Specifies the SMUX format when operat-
ing at 88.2 or 96 kHz. See “ADAT SMUX
Type” on page 54.
Configure IP Chooses between DHCP and a manually
assigned IP Address.
LCD Contrast Adjusts the contrast of the LCD.
Factory Defaults Restores factory default settings.